2 Replies Latest reply on May 24, 2013 5:30 AM by mallikarjun NameToUpdate

    could not find kernel image:boot_2_0_x64\pxeboot.0 While Bare Metal Provisioning From BBSA8.2.01 In CLM Environment.

      Hi ,

       

      I am not able to provision bare metal of windows 2008 server R2 64bit in bbsa and pls find screenshot attached.

       

       

       

      Regards

      Mallikarjun

        • 1. Re: could not find kernel image:boot_2_0_x64\pxeboot.0 While Bare Metal Provisioning From BBSA8.2.01 In CLM Environment.
          Bill Robinson

          when you generate the winpe image, the bootmgr.exe should be extracted to the tftproot, and the pxeboot.0 should be extracted to the X86PC\pxelinux directory.  is the extraction process working?  if not you may need to manually extract the files: https://docs.bmc.com/docs/display/bsa83/Extracting+boot+files+for+WinPE+2.0+and+later+images

          • 2. Re: could not find kernel image:boot_2_0_x64\pxeboot.0 While Bare Metal Provisioning From BBSA8.2.01 In CLM Environment.

            Hi Robin,

             

            Thanks for the correct answer and please find some more information on that issue below.

             

             

            (Applies only to using the script to create boot image files.) Find the following files:

            CreateWinPE2_x.vbs

            1. extractpxeboot.vbs

            These files are located in the provisioning\winpe subdirectory. For example, if

            you placed provision-files.zip in C:\BMC_BL and unzipped to that same

            location, CreateWinPE2_x.vbs and extractpxeboot.vbs are located here:

            C:\BMC_BL\provisioning\winpe\CreateWinPE2_x.vbs

            C:\BMC_BL\provisioning\winpe\extractpxeboot.vbs

            11 (Applies only to using the script to create boot image files.) Copy

            CreateWinPE2_x.vbs and extractpxeboot.vbs to the WAIK installation

            subdirectory: \Tools\PETools

            For example:

            C:\Program Files\WinAIK\Tools\PETools.

            Execute below  command as follows:

            C:\Program Files\Windows AIK\Tools\PETools>extractpxeboot.vbs

            C:\Program Files\Windows AIK\Tools\PETools>pesetenv.cmd

            Updating path to include dism, oscdimg, imagex

            C:\Program Files\Windows AIK\Tools\PETools\

            C:\Program Files\Windows AIK\Tools\PETools\..\AMD64;C:\Program Files\Windows

            AIK\Tools\PETools\..\x86

               C:\Program Files\Windows AIK\Tools\PETools\..\AMD64\Servicing;C:\Program File

            s\Windows AIK\Tools\PETools\..\x86\Servicing;

             

            Execute below  command as follows:

            C:\Program Files\Windows AIK\Tools\PETools>extractpxeboot c:\temp

            C:\Program Files\Windows AIK\Tools\PETools>dir c:\temp

            Volume in drive C has no label.

            Volume Serial Number is 8C8E-8602

            Directory of c:\temp

            05/10/2013  05:32 AM    <DIR>          .

            05/10/2013  05:32 AM    <DIR>          ..

            07/13/2009  06:26 PM           523,328 bootmgr.exe

            06/10/2009  02:15 PM            25,772 pxeboot.0

            05/07/2013  02:47 AM    <DIR>          stage

            05/10/2013  05:32 AM    <DIR>          temp

                           2 File(s)        549,100 bytes

                           4 Dir(s)   1,805,561,856 bytes free

            C:\Program Files\BMC Software\BladeLogic\tftp>copy c:\temp\bootmgr.exe .

            Copy bootmgr.exe and pxeboot.0 to below  paths

            C:\Program Files\BMC Software\BladeLogic\tftp

            C:\Program Files\BMC Software\BladeLogic\tftp\X86PC

            C:\Program Files\BMC Software\BladeLogic\tftp\boot_2_0_x64

             

            Regards,

            Mallikarjun