If this White Paper is not available elsewhere, could you upload it to the Documents area of this forum?
Thanks & Regards,
I have downloaded this paper from one of our document libraries itself but i dont know where did I download it from I can send it to you as well if you want.
I found the direct link as well- http://documents.bmc.com/supportu/documents/25/44/202544/202544.pdf
The one I have is just the same except it has 8.2 mentioned on it, Thats it. the documents are the same.
Hi David can you check that the Boot_2_0_x64 is in the root of your tftproot folder.
What is the setup? what OS are you running this from?
how is your Datastore and tftproot folder populated?
what is in the boo_2_0_x64 dir.
how did you generate the winpe image - the wizard? what options did you provide the wizard ?
Hi David I dont see a bootmgr.exe in your tftproot?
could you have a look at your configuration of your Properties dictionary under DataStore you should have a instance in your Pxe DataStore
I usually call this
It needs to have:
"FULL_PATH" in your case "D:\pxestore"
"LOCATION" "IP ADDRESS" of the server hosting the pxestore
"PASSWORD" "Password to access the share"
also check your Provisioning Configuration
Configuation menu/Provisioning Configuation
Check your system Package types
for example Windows 2008 Standard x64
Installer location \Win2K8_x64\......
make sure you set the installer location and the RSCD installer location eg: \Agents\Windows\........
and set the intial partition size
these are mostly defaulted to the following
Interface to bind eth0
multicast address 184.108.40.206
Listening port 4011
prompt timeout 0
IP address: "ip_address of your app server" or which ever server your tftpstore is located
base directory: in your case D:\PXE\tftproot
ip address default is 220.127.116.11
client port: 1758
server port: 1759
make sure that the winpe 2.x image file you have created is set as a 64bit if you are provisioning 64bit os and that you have set it as the default boot image, and that the kernal name is listed as boot_2_0_x64
In the Doc, it says "
If you plan to provision Windows operating systems, check that the
bootmgr.exe and pxeboot.0 files exist in tftproot
Where are these files found/created?
he's not getting to the datastore part yet, so that is irrelevant right now.
my guess is that the bootmgr was not copied over, possibly because you provided the path to the tftp location. i think you need to run the vb scripts to extract the bootmgr and pxeboot.0. you could run the winpe wizard again and see if the messages in the log say something to that effect.
otherwise you could try checking the box 'use tftp root as base directory' i believe you will have to have the tftp server registered w/ the fqdn or whatever a reverse lookup returns for that to work properly.
I have recreated the Image using the FQDN, and ticked the Use tftp root as base directory, that has now created a bootmgr.exe in the root of tftproot, should there also be a pxeboot.0 file?
Pxeboot.0 should be in tftproot\X86PC\pxelinux