6 Replies Latest reply on Jan 30, 2018 4:11 AM by Sameer Pataskar

    Monitoring of printer counters with BMC Truesight is possible?

    Carlos Patiño

      Monitoring of printer counters with BMC Truesight is possible?

        • 1. Re: Monitoring of printer counters with BMC Truesight is possible?
          Ranjith P K

          Yes. You my use Light Weight Protocol KM v2.0 or above to monitor printers.

           

          Identify the OIDs using the appropriate MIB file and create custom monitor using CMA.

           

          Regards

          Ranjith

          1 of 1 people found this helpful
          • 2. Re: Monitoring of printer counters with BMC Truesight is possible?
            Sameer Pataskar

            Adding to Ranjith's comment, If you dont have mibs then you can identify oids snmpwalk as well, check values returned by oids and compare it with Printer's latest value (Reverse Engg.) Also each model may have different oids.

             

            Once oids are identified, Create custom monitors with those oids under CMA, add printer devices and associate custom monitors which were created to them.

             

            Thanks & Regards,

            Sameer Pataskar

            1 of 1 people found this helpful
            • 3. Re: Monitoring of printer counters with BMC Truesight is possible?
              Carlos Patiño

              Thank you, for your help, we are trying to add the policy with BMC Presentation, we run snmpwalk.exe -v2c -c public 192.160.249.207 .1.3.6.1 getting OID for number of printed pages, but it does not show us in BMC Operation Management

              • 4. Re: Monitoring of printer counters with BMC Truesight is possible?
                Sameer Pataskar

                Hi Carlos,

                 

                If you have identified and gathered oids for a printer, You need to perform few more steps below.

                 

                1) On a server, Install Patrol Agent with LWP km with latest version.

                2) Create a monitoring policy in presentation server and select LightWeight Protocol as monitoring solution, Monitoring Profile as SNMP, and Monitor Type as Custom Monitor

                3) Add Monitor, Specify Monitor Name, Click on Add Monitor Counter, Provide name and you need to add oids under oids/formula which has been identified along with that unit needs to be specified.

                4) Now, You need to specify device IP/Name for which you wish to check data, hence you need to again click on Add Monitoring configuration, select Monitoring Solution as LightWeight Protocol, Monitoring Profile as SNMP and Monitor Type as SNMP.

                5) Add Device IP/Name, specify community string, version and under select monitoring provide Monitor Names which was created under custom monitor. Click Ok and then restart the agent.

                 

                You should be able to see device in TSIM with a Custom Monitor

                 

                You may use mib browser utility to get entire set of oids (snmpwalk) and which can be used for validation purpose as well.

                 

                Thanks & Regards,

                Sameer Pataskar

                • 5. Re: Monitoring of printer counters with BMC Truesight is possible?
                  Carlos Patiño

                  with snmpwalk I got the oid registering with the indications provided, the policy is observed in the collector but I do not observe data, annex the created policy

                   

                   

                  Light Weight Protocols

                  2.0.10

                  SNMP

                  Custom monitor

                  Printers / MonitorName Printers

                  Printers / MonitorCategory 1

                  Leaves / CounterName Sheets

                  Sheets / Unit 42

                  Sheets / GraphByDefault 0

                  Sheets / KPI 0

                  Sheets / Availability 0

                  Sheets / Statistical 1

                  Sheets / ResponseTime 0

                  Leaves / Delta 0

                  Sheets / MeasureAS 1

                  Sheets / OidFormula .3.6.1.4.1.236.11.5.1.1.3.27.0

                  Sheets / CustomUnit sheets

                  Light Weight Protocols

                  2.0.10

                  SNMP

                  SNMP

                  / ReadFromFile 0

                  / SHARED_Port 161

                  / SHARED_PollInterval 300

                  / SHARED_Retries 2

                  / SHARED_Timeout 2

                  / SHARED_Version 0

                  / SHARED_AuthorizationCred ********

                  / SHARED_AuthorizationProtocol 0

                  / SHARED_PrivacyProtocol 0

                  / RootDisplayName Network devices (SNMP)

                  / DeviceMapping 1

                  / Debug 0

                  / Playback 0

                  192.160.249.207/DeviceName 192.160.249.207

                  192.160.249.207/Port 161

                  192.160.249.207/PollInterval 300

                  192.160.249.207/Retries 2

                  192.160.249.207/Timeout 2

                  192.160.249.207/Version 2

                  192.160.249.207/AuthorizationCred ********

                  192.160.249.207/AuthorizationProtocol 0

                  192.160.249.207/PrivacyProtocol 0

                  192.160.249.207/SNMPAgentAvailability 0

                  192.160.249.207/InterfaceMIB 0

                  192.160.249.207/CiscoLocalInterfaces 0

                  192.160.249.207/CiscoRouter 0

                  192.160.249.207/F5BigIP 0

                  192.160.249.207/HostMIB 1

                  192.160.249.207/TCP 0

                  192.160.249.207/RMON 0

                  192.160.249.207/OpenVMS 0

                  192.160.249.207/CustomMonitors Printers

                   

                  Thanks & Regards,

                  • 6. Re: Monitoring of printer counters with BMC Truesight is possible?
                    Sameer Pataskar

                    Hi Carlos,

                     

                    From Policy Management,

                    just enable debug and check logs under %PATROL_HOME%\PSM\logs\java\agentport(default could be 3181)\

                    Under this, you may find folder with device name and under that you will see details about errors.

                     

                    Thanks & Regards,

                    Sameer Pataskar