Are the File Server details mentioned in the application server log correct?
Is the RSCD Agent up an running on the File Server host?
Is the RSCD Access configured correctly?
Please (always) mention the version of BSA
1. Agentinfo to fileserver
2. Check the RSCD agent service on File server
3. Check configuration of FileServer using blappconf or blasadmin utility
As Jim Suggested please share the versions of the product
The version I am using for BBSA is 8.5 :
In exports file, I have made an entry :
In users.local file :
BMC Bladelogic RSCD agent service is running.
Unable to configure appserver.
Please find the below error which I amm getting :
The current path Fileserver is C: drive. I tried to change it but getting the same initial error(File validation error).
What's in the rscd.log on File Server?
You have configured File Server on the same server as Application Server and NSh where you were running the above commands?
Try agentinfo <file_server_ip>
in the exports file there needs to be a space between the asterisk and the rw.
Yes. The Application server and File server is on the same server.
Yes Bill, there is a space between asterisk and rw. And what I did is, I change the Log On As to Local system of BMC Bladelogic RSCD Agent service and started the service of BMC Bladelogic RSCD Agent. After this blappconf worked and Application spawner, Application service service got started.
But I could'nt understood the proper resolving reason behind it. Means what I did for this and it got resolved.
you shouldn't need to change anything w/ the rscd service. please undo that so we can figure out what is wrong w/ your env.
Can I get the exact solution for this File Server validation error. I am getting this error again.
I have installed RSCD agent, Application server and BSA console and have given the Log On As as Administrator.
On NSH, I have entered : blappconf and blasadmin utility but couldnt resolved.
Getting error connection refused.
File server and Application server is on the same machine. I have checked RSCD exports file where there is a space between asterisk and rw.
In users.local, I have mentioned the following entries :
BLAdmins :BLAdmin rw, map=Administrator
RBACAdmins :RBACAdmin rw, map=Administrator
System :System rw, map=Administrator
Please, do the needful.
Can you try to add below entry in users.local file of File Server
After this check if it works
Also check if port 4750 is in LISTEN mode and any error in rscd logs.
Could you please share APP server logs & AppServerLauncher logs
instead of just adding random things, let's look in the rscd log when the you get the error from agentinfo and blappconf.