The output looks to be perfectly normal.
What do you think the problems is?
The screen host shows results of Patch Analysis and it shows that the Analysis has identified 5 Errata and 11 RPM from the catalog need to be installed on 1 or more of the scanned machines.
Yup that's right, but my question is we did that in Jan_14, and Feb_14. at that time also it's shown it was success but while we are running now it's showing like this. why it's showing like that? that's what my question.
Thanks & Regards
The Patch Analysis is still showing success.
The screen shot shows the results of an analysis, using a patch catalog, running against 6 targets
If the results between one analysis run and another analysis run are different for the same target then either the patch catalog was updated, or some change occurred on the target.
You need to look at the results in more detail.
Thanks for Your response Jim...
okay Jim, but we did an activity with AV on all targets but we are getting the result in those 6 servers only, why it's happened. by using that catalog we did the patching for 25 targets, why we got that missing errata on those six systems only.
Per the screen shot, only 6 targets were scanned (analysed)
yeah at that time we did for 25 targets. After that when we run analysis job we got that message on those six targets only. that's we cross checked the catalog to whether these errata's are updated or not and those are updated again we run analysis against only these 6 servers. screen shot belongs to that process..
So, you have targets which you think are the same, but Patch Analysis Job (PAJ) says they are not the same -it thinks that some have some missing patches.
Pick one of each (one target that had no missing errata reported by Patch Analysis, and one target that had some missing
Examine both targets for the rpms/errata per the PAJ results.
You should be able to confirm that the tagets are different.
Hopefully this will reassure you.
okay jim i will check that and let you know. But the servers are same...
We did patching using catalog in the month Jan_14 okay after completion of patching for post patching report we run the analysis job on my servers okay. That time process was successful and showing missing erratas for 6 servers. Then we cross checkec with catalog and smart group for that month and get confirmed those errata's are included and applied for patching. after confirmation we try to run the same analysis job on "Failed targets" then we got that result which i have attached.
servers same and job is also same.but why we are getting that errata's are missing. why?