• How to adjust a time in a view of a container that shows me the hour in Daylight Saving Time?

    Hello! I have a container of MVCICS in MV Explorer with many views. Some of them are with current time as a daylight saving time. I think that is some option when customizing the view. Does anyone have this issue? ...
    Monica Akinaga
    created by Monica Akinaga
  • MVIMS IMFECP00 ==> IMSIDECP: Problem in View PARMEDT Event Collector

    Hello,   we are using the standard documented inside IMFECF00 which allows to use IMSIDECP and IMSIDSYS. Unfortunately, when viewing the Event Collector we get this: BBMXB614E Error detected in selector during...
  • DOES MAINVIEW FOR CICS 6.3 IS SUPPORTED FOR ZOS 2.4 ? Any maintanence to be applied ?

    We have mainview for cics 6.3, we are upgrading to zos 2.4.. do we need to apply any maintanence for compatibility ?
    Balaji Natarajan
    last modified by Balaji Natarajan
  • NGL NGL.MVI1 version 1040  when in need to change the NGL Registry

    Hello! I just want to share a snippet. Had to change the NGL registry to make it compliant to the naming standards. It is defined in HLQ.&G..&SSID..DBCENV(NLGPIID) by parameter RD. It seem the first time t...
    Feli Brachthaeuser
    last modified by Feli Brachthaeuser
  • IMS Deadlocks

    we see in Mainview lots of Deadlocks  concerning DBT-Region always same PSB and the same IMS-DB (six DBT-regions showing the same Database and PSB), but nothing happened. Its a development IMSPLEX with Blockleve...
    Hugo Obert
    last modified by Hugo Obert
  • Mainview RACF Profiles and RACF CLASS JESSPOOL

    Hello ,   As it is technicall possible to display JOBOUTPUT in the PLEXMGR View JOBSTAT, there is a need to secure this. that is the function of these profiles: BBM.PLEXMGR.targetid.MYC20. ownerpre.SP BBM.PL...
    Feli Brachthaeuser
    last modified by Feli Brachthaeuser
  • RACF CDT definition ENF for Mainview

    Hello,   the documentation shows only the old MACRO for the Class descriptor table.   Can you please tell me whether Mainview should use SIGNAL Y or N? What is the suggestion for the MAXLENGTH? thanks ...
    Feli Brachthaeuser
    last modified by Feli Brachthaeuser
  • Mainview AO dynamic TIME rules?

    I have been digging around and can't find an answer to this question:   Can you create dynamic TIME rules for Mainview AO along the same lines of dynamic TOD rules in CA OPS/MVS.   What I need to do is whe...
    Kirby Kern
    last modified by Kirby Kern
  • UIM problem using z/OS RACF SITE Certificate

    I have BMCUIM task working fine with a keyring containing a certificate owned by ID(UIM): <SSL_STORE>                  &...
    Larry Uher
    last modified by Larry Uher
  • Switch CICS CMRDETL offline

    I would like to switch all CICS CMRDETL recording at midnight when most regions are down.  Then most regions get a switch when they start early morning.   The only way I know to do this is with FST2 SWITCH ...
    Irwin Poche
    last modified by Irwin Poche
  • How does TOM (Total Object Manager) recognize a Started Task Name

    I have one task that TOM is not recognizing.  Say the Task Name is STCTASK1.  Every time I start monitoring it says it's not up - but it is.  It keeps trying to restart and then fails because it's up.&#...
    Chris Forzaglia
    last modified by Chris Forzaglia
  • TOSZLINK- Why separate from BBLINK and still needed in STEPLIB (MVCICS/CTG, MVIP)

    Hello, Why is TOSZLINK providing special servies for MVCICS CTG and MVIP whivh can't delivered through BBLINK? Can you please explain why TOSZLINK is needed in the STEPLIB of the PAS when using CTG monitoring with M...
    Feli Brachthaeuser
    last modified by Feli Brachthaeuser
  • Mainview AutoOperator SYNC command

    Hi,   Recently we implemented the /RESET command for CSM objects. For this purpose, we added a new command rule with text id ‘/RESET’ that calls the CSMACT exec. This command changes the CSM objects...
    Raaji Abraham
    last modified by Raaji Abraham
  • Unilateral swap out Reasons

    We use MAINVIEW for z/Os. One fine day our low priority service class was showing 100% unilateral delay . We used the MPLSTAT menu to check our thresholds . We did not reached the threshold . What are the other view...
    Shivang Sharma
    last modified by Shivang Sharma
  • Unilateral Swapout

    Jobs show up as unilateral swapped out . On issuing the MPLSTAT command i could see my thresholds are not reached . So what would be the cause for this . On what basis we see address spaces unilateral swapped out
    Shivang Sharma
    last modified by Shivang Sharma
  • CAS address space and alarms

    I'm trying to get my CAS address space to accept my defined alarms... each time the CAS is bounced or an IPL takes place... our alarms get reset to inactive... how do I make that permanent?
    Roberto Ramirez
    last modified by Roberto Ramirez
  • Getting a CMF batch report for CPU Utilization per Job / Started Task

    Would anybody know if there's a way to get job / subsystem CPU utilization reports using the batch form of CMF Analyzer on the mainframe. I would like to get CPU stats for each separate job or started task.  Thanks.
    Gregory Evans
    last modified by Gregory Evans
  • Is there a way to dump all PTF's for a date range

    We apply maintenance to our automation suite twice a year using the cumulative releases.  As there is a gap between the freezing of the code and the time we apply it I would like to evaluate what PTF's published ...
    Robert Woodward
    last modified by Robert Woodward
  • Dynamic creation of rules?

    Hello. I am new to MainView, which we are converting to from another suite of products. This is my first post on the forum.   My concern is with automation. We are converting from another automation product to M...
    Albert Prete
    last modified by Albert Prete
  • ZiiP usage of a Job with Db2 Util

    Hello,   we have a job running Db2 utility with ZiiP switched on. Unfortunately neither MVDB2 DUSER nor JINFO shows the ZiiP usage. Views JZIIP* show only STCs using ZiiPs. We would have expected to see the...
    Feli Brachthaeuser
    last modified by Feli Brachthaeuser