Share This:

By applying PTF BQO1216 to MainView AutoOPERATOR version 7.3.xx you will have 2 new solutions:

1. MainView AutoOPERATOR zAware LPAR data solution provides summary zAware interval data. 

 

The MainView AutoOPERATOR zAware LPAR data solution provides summary data obtained from the IBM® System z® Advanced Workload Analysis Reporter (IBM zAware) appliance that analyzes data from the OPERLOG. 

 

2. MainView AutoOPERATOR zAware Interval data solution provides detailed zAware interval data.

 

The MainView AutoOPERATOR zAware Interval data solution provides detailed data obtained from the IBM zAware appliance that analyzes data from the OPERLOG.

 

You can use these solutions with any of the MainView AutoOPERATOR products to check either interval or detailed data returned from zAware, looking for anomaly count based on rarity of the message or changes to the message traffic.  To continually monitor the zAware appliance, you can schedule these solutions to execute via a Time-event-Rule with an interval frequency.  If an exception is discovered MainView AutoOPERATOR can take action such as generate an email, open a Remedy ticket, or take other action.

 

If you have IBM zAware appliance and any of the MainView AutoOPERATOR products, please install the PTF and take advantage of these new solutions.

 

For detailed information on these 2 new solutions, please refer to the Technical Bulletin at http://www.bmc.com/support (login required), then “A – Z Supported Product List”, search for MainView AutoOPERATOR 7.3.xx